Ku band LNA 1:2 redoundancy system
The redundancy system is applicable to company's all LNA. The whole system consists of a low-noise amplifier platform (3 LNA, 2 working +1 redundancy) and an outdoor controller. Ths product is applicable to remote areas and unattended satellite communication stations.
■ extremely low system noise temperature
■ LNA current real-time monitoring and current abnormal alarm
■ low power consumption and high cost performance
■ easy to install and maintain
Technical parameters of products
|
items |
techincal parameters |
remarks |
|
functions |
1） amplify LNA's rf signal 2） monitor working status and failure warning 3） automatically/manually switch main and redundancy 4） query failure status remotely 5） set and query remote controll and local controll remotely 6） set and query automatic switch of main and redundancy or manual switch of main and redundancy |
|
|
frequency range |
11.25～12.75GHz |
|
|
input power |
-60dBm（typical） 0dBm（maximum undamage） |
|
|
noise temperature |
90K |
indoor temperature23℃ |
|
gain |
62±2 dB |
|
|
gain flatness |
≤2.0 dB / full frequency ≤0.6 dB / 40 MHz ≤0.2 dB / 10 MHz |
|
|
gain stability |
≤3.0 dB ≤1.0 dB / day |
working temperature range 23℃ under constant condition |
|
output power（P1dB） |
≥10dBm |
|
|
output third order cut-off point |
≥20dBm |
|
|
spuriouse |
≤-60dBc |
P1dB-10dB |
|
input SWR |
≤1.35 : 1 |
|
| output SWR |
≤1.50 : 1 |
|
|
main and redundancy switching time |
≤200ms |
|
|
rf input connector |
BJ120（FBP120） |
|
|
rf output connector |
SMA-K |
|
|
control connector |
14core aviation connector |
|
|
controller structure |
19inch subrack，height 1U |
|
|
power |
220VAC，50Hz，40W |
|
|
power supply connector |
IEC320 |
|
|
controller interface |
serial port：DB9（F） net port：RJ45 |
RS232/RS485 LAN |